Quanta Computer QuantaMesh User Manual page 413

UANTA COMPUTER INC.
5.11.2.6 sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients in seconds.
Syntax
sntp unicast client poll-retry <poll-retry>
no sntp unicast client poll-retry
< poll-retry> - Polling retry in seconds. The range is 0 to 10.
no - This command will reset the poll retry for SNTP unicast clients to its default value.
Default Setting
The default value is 1.
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 413