Quanta Computer QuantaMesh User Manual page 382

UANTA COMPUTER INC.
5.9.5.3 tacacs-server keystring
This command is used to configure the TACACS+ authentication and encryption key in re-confirm
format.
Syntax
tacacs-server keystring
Default Setting
None
Command Mode
Global Config
5.9.5.4 tacacs-server timeout
This command is used to configure the TACACS+ connection timeout value.
Syntax
tacacs-server timeout [<timeout>]
no tacacs-server timeout
<timeout> - The connection timeout value. Max timeout (Range: 1 to 30).
no - This command is used to reset the timeout value to the default value.
Default Setting
5
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 382