Configuration Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.4.2 Configuration Commands

5.4.2.1 spanning-tree
This command sets the spanning-tree operational mode to be enabled.
Syntax
spanning-tree
no spanning-tree
no - This command sets the spanning-tree operational mode to be disabled. While disabled, the
spanning-tree configuration is retained and can be changed, but is not activated.
Default Setting
Disabled
Command Mode
Global Config
5.4.2.2 spanning-tree protocol-migration
This command enables BPDU migration check on a given interface. The all option enables BPDU
migration check on all interfaces.
Syntax
spanning-tree protocol-migration {<slot/port> | port-channel <portchannel-id> | all}
no spanning-tree protocol-migration {<slot/port> | port-channel <portchannel-id> | all}
<slot/port> - is the desired interface number.
<portchannel-id> - is the desired interface number. The range of port-channel ID is 1 to 4.
all - All interfaces.
no - This command disables BPDU migration check on a given interface. The all option disables
BPDU migration check on all interfaces.
Default Setting
None
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 287