Ipv6 Protocol Independent Multicast Commands; Show Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

7.6 IPv6 Protocol Independent Multicast Commands

7.6.1 Show Commands

7.6.1.1 show ipv6 pim
display the system-wide information for PIM-DM or PIM-SM.
Use this command to
Syntax
show ipv6 pim
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
PIM Mode: Indicates whether the PIM mode is dense (PIM-DM) or sparse (PIM-SM)
Data Threshold Rate: Indicates the data threshold rate for PIM.
Interface: Valid slot, and port number separated by forward slashes.
Interface-Mode: Indicates whether PIM is enabled or disabled on this interface.
Operational-State: The current state of PIM on this interface. Possible values are Operational or
Non-Operational.
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands 871