Configuration Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.18.2 Configuration Commands

5.18.2.1 ip verify source
This command configures the IPSG source ID attribute to filter the data traffic in the hardware. Source ID
is the combination of IP address and MAC address. Normal command allows data traffic filtration based
on the IP address. With the "port-security" option, the data traffic will be filtered based on the IP and
MAC addresses.
Syntax
ip verify source [port-security]
no ip verify source [port-security]
no - This command disables the IPSG configuration in the hardware.
Default Setting
Disabled
Command Mode
Interface Config
5.18.2.2 ip verify binding
This command configures static IP source guard (IPSG) entries.
Syntax
ip verify binding <mac-address> vlan <vlan-id> <ip address> interface <slot/port>
no ip verify binding <mac-address> vlan <vlan-id> <ip address> interface <slot/port>
no - This command removes the IPSG static entry from the IPSG database.
Default Setting
None
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 521