Quanta Computer QuantaMesh User Manual page 338

UANTA COMPUTER INC.
5.9.1.7 show dot1x authentication-history
This command is used to display the Dot1x Authentication History Log for the specified port or all ports.
Syntax
show dot1x authentication-history <all | <slot/port>>
Default Setting
None
Command Mode
Privileged Exec
Display Message
Time Stamp: The exact time at which the event occurs.
Interface: Physical Port on which the event occurs.
MAC-Address: The supplicant/client MAC address.
VLANID: The VLAN assigned to the client/port on authentication.
Auth Status: The authentication status.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 338