Ets Classofservice Traffic-Class-Group; Ets Traffic-Class-Group Max-Bandwidth - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

9.3.3 ets classofservice traffic-class-group

Use the ets classofservice traffic-class-group command to map the internal Traffic Class Group.
Syntax
ets classofservice traffic-class-group <0-7> <0-2>
<0 – 7>: Traffic Class number.
<0 – 2>: Traffic Class Group number.
Default Setting
None
Command Mode
Data-Center-Bridging Interface Mode

9.3.4 ets traffic-class-group max-bandwidth

Use the ets traffic-class-group max-bandwidth command to specify the maximum transmission
bandwidth limit for each Traffic Class Group.
Syntax
ets traffic-class-group max-bandwidth <bw-0> <bw-1> <bw-2>
<bw-0>: The maximum bandwidth percentage for TCG 0.
<bw-1>: The maximum bandwidth percentage for TCG 1.
<bw-2>: The maximum bandwidth percentage for TCG 2.
Default Setting
None
Command Mode
Data-Center-Bridging Interface Mode
QuantaMesh | Data Center Bridging Commands
Layer 2/3/4 Managed Switch
995