Quanta Computer QuantaMesh User Manual page 783

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
Next Hop: IP address of the next system that is used when forwarding a packet to the destination
network. An entry of 0.0.0.0 indicates that the router has some non-BGP routes to this network.
Metric: If shown, the value of the interautonomous system metric.
LocPref: Local preference value as set with the set local-preference route-map configuration
command. The default value is 100.
Path: Autonomous system paths to the destination network. There can be one entry in this field for
each autonomous system in the path.
QuantaMesh | Routing Commands 783