Quanta Computer QuantaMesh User Manual page 1003

UANTA COMPUTER INC.
9.5.1.2 show vmtracer session
This command displays information about a specified VM Tracer session on the system.
Syntax
show vmtracer session [<name>]
<name> - displays the specific configured VM Tracer session with the name.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Session Name: the configured name of the VM Tracer session.
vCenter URL: the url address of vCenter. It should be start with https://.
Username: the login username of vCenter on the VM Tracer session
Password: the login password of vCenter on the VM Tracer session.
AutoVlan: the mode of AutoVlan. The value should be Enable of Disable.
Allow-Vlan: allow-vlan list of the VM Tracer session.
Session Status: the link state of the VM Tracer session.
QuantaMesh | Data Center Bridging Commands
Layer 2/3/4 Managed Switch
1003