Quanta Computer QuantaMesh User Manual page 261

UANTA COMPUTER INC.
5.3.13.12 set sflow receiver port
The user can go to the CLI Global Configuration Mode to set collector UDP port, use the sflow receiver
<index> port <1-65535> global configuration command. Use the no sflow collector-port return to
default UDP port 6343.
Syntax
sflow receiver <index> port <1-65535>
no sflow receiver <index> port
Default Setting
6343
Command Mode
Global Config
5.3.13.13 set sflow interval
The user can go to the CLI Interface Configuration Mode to set polling interval, use the sflow poller
interval <0-86400> interface configuration command. Use the no sflow poller interval return to default
value zero.
Syntax
sflow poller interval <0-86400>
no sflow poller interval
Default Setting
0
Command Mode
Interface Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 261