Quanta Computer QuantaMesh User Manual page 876

UANTA COMPUTER INC.
7.6.1.6 show ipv6 pim rp-hash
This command displays which rendezvous point (RP) is being used for a specified group.
Syntax
show ipv6 pim rp-hash <group-address>
<group-address> - The IPv6 address of the RP for the group specified.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
RP Address: The IPv6 address of the RP for the group specified.
Type: Indicates the mechanism (BSR or static) by which the RP was selected.
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands 876