Quanta Computer QuantaMesh User Manual page 575

UANTA COMPUTER INC.
5.20.5.7 show service-policy
This command displays a summary of policy-oriented statistics information for all interfaces in the
specified direction. The direction parameter indicates the interface direction of interest. This command
enables or disables the route reflector client. A route reflector client relies on a route reflector to
re-advertise its routes to the entire AS. The possible values for this field are enable and disable.
Syntax
show service-policy {in | out}
Command Mode
Privileged Exec
Display Message
The following information is repeated for each interface and direction (only those interfaces
configured with an attached policy are shown):
Interface: The slot number and port number of the interface (slot/port).
Operational Status: The current operational status of this DiffServ service interface.
Policy Name: The name of the policy attached to the interface.
None of the counters listed here are guaranteed to be supported on all platforms. Only
i
supported counters are shown in the display output.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 575