UANTA COMPUTER INC.
5.20.2.18 match srcip
This command adds to the specified class definition a match condition based on the source IP address
of a packet.
Syntax
match srcip <ipaddr> <ipmask
<ipaddr> - specifies an IP address.
<ipmask> - specifies an IP address bit mask; note that although it resembles a standard subnet
mask, this bit mask need not be contiguous.
Default Setting
None
Command Mode
Class-Map Config
>
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
549
Need help?
Do you have a question about the QuantaMesh and is the answer not in the manual?