Quanta Computer QuantaMesh User Manual page 686

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
Area Mismatch: The number of OSPF packets discarded because the area ID in the OSPF header
is not the area ID configured on the ingress interface.
Invalid Destination Address: The number of OSPF packets discarded because the packet's
destination IP address is not the address of the ingress interface and is not the AllDrRouters or
AllSpfRouters multicast addresses.
Wrong Authentication Type: The number of packets discarded because the authentication type
specified in the OSPF header does not match the authentication type configured on the ingress
interface.
Authentication Failure: The number of OSPF packets dropped because the sender is not an
existing neighbor or the sender's IP address does not match the previously recorded IP address for
that neighbor.
No Neighbor at Source Address: The number of OSPF packets dropped because the sender is
not an existing neighbor or the sender's address does not match the previously recorded IP address
for that neighbor.
Invalid OSPF Packet Type: The number of OSPF packets discarded because the packet type field
in the OSPF header is not a known type.
Hellos Ignored: The number of received Hello packets that were ignored by this router from the new
neighbors after the limit has been reached for the number of neighbors on an interface or on the
system as a whole.
QuantaMesh | Routing Commands 686