Quanta Computer QuantaMesh User Manual page 108

UANTA COMPUTER INC.
5.2.5.4 show garp configuration
This command displays GMRP and GVRP configuration information for one or all interfaces.
Syntax
show garp configuration [{<slot/port> | port-channel <portchannel-id>}]
<slot/port> - Specifies the desired interface.
<portchannel-id> - Specifies the desired port-channel interface. The range of port-channel ID is 1 to
64.
no parameter - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface: This displays the slot/port of the interface that this row in the table describes.
GVRP Mode: Indicates the GVRP administrative mode for the port. It may be enabled or disabled. If
this parameter is disabled, Join Time, Leave Time, and Leave All Time have no effect. The factory
default is disabled.
GMRP Mode: Indicates the GMRP administrative mode for the port. It may be enabled or disabled. If
this parameter is disabled, Join Time, Leave Time, and Leave All Time have no effect. The factory
default is disabled.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 108