Denial Of Service Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.9.7 Denial Of Service Commands

5.9.7.1 Show Commands
5.9.7.1.1 show dos-control
This command displays the Denial of Service configurations for the entire system.
Syntax
show dos-control
Default Setting
None
Command Mode
Privileged Exec
Display Message
TCP Fragment Mode: May be enabled or disabled. The factory default is disabled.
Min TCP Hdr Size: The range is 0-255. The factory default is 20.
ICMPv4 Mode: May be enabled or disabled. The factory default is disabled.
Max ICMPv4 Payload Size: The range is 0-16376. The factory default is 512.
ICMPv6 Mode: May be enabled or disabled. The factory default is disabled.
Max ICMPv6 Payload Size: The range is 0-16376. The factory default is 512.
ICMP Fragment Mode: May be enabled or disabled. The factory default is disabled.
TCP Port Mode: May be enabled or disabled. The factory default is disabled.
UDP Port Mode: May be enabled or disabled. The factory default is disabled.
SIPDIP Mode: May be enabled or disabled. The factory default is disabled.
SMACDMAC Mode: May be enabled or disabled. The factory default is disabled.
TCP FIN&URG&PSH Mode: May be enabled or disabled. The factory default is disabled.
TCP Flag&Sequence Mode: May be enabled or disabled. The factory default is disabled.
TCP SYN Mode: May be enabled or disabled. The factory default is disabled.
TCP SYN&FIN Mode: May be enabled or disabled. The factory default is disabled.
First Fragment Mode: May be enabled or disabled. The factory default is disabled.
TCP Fragment Offset Mode: May be enabled or disabled. The factory default is disabled.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 388