Whichboot; Boot-System - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.16.5 whichboot

This command is used to display which files were booted when the system powered up.
Syntax
whichboot
Default Setting
None
Command Mode
Privileged Exec

5.16.6 boot-system

This command is used to specify the file or image used to start up the system.
Syntax
boot-system {config | opcode} <filename>
<filename> - name of the configuration or image file.
config - configuration file.
opcode - run time operation code.
Default Setting
None
Command Mode
Privileged Exec
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 480