Quanta Computer QuantaMesh User Manual page 502

UANTA COMPUTER INC.
5.17.1.2 show ip dhcp snooping binding
This command displays the DHCP Snooping binding entries. To restrict the output, use the following
options:
•
Dynamic: Restrict the output based on DCHP snooping.
•
Interface: Restrict the output based on a specific interface.
•
Static: Restrict the output based on static entries.
•
VLAN: Restrict the output based on VLAN.
Syntax
show ip dhcp snooping binding [{static | dynamic}] [interface <slot/port>] [vlan id]
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC Address: Displays the MAC address for the binding that was added. The MAC address is the
key to the binding database.
IP Address: Displays the valid IP address for the binding rule.
VLAN: The VLAN for the binding rule.
Interface: The interface to add a binding into the DHCP snooping interface.
Type: Binding type; statically configured from the CLI or dynamically learned.
Lease (Secs): he remaining lease time for the entry.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 502