Quanta Computer QuantaMesh User Manual page 359

UANTA COMPUTER INC.
5.9.2.4 username defaultlogin
This command assigns the authentication login list to use for non-configured users when attempting to
log in to the system. This setting is overridden by the authentication login list assigned to a specific user
if the user is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
Syntax
username defaultlogin <listname>
<listname> - an authentication login list.
Default Setting
None
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 359