Configuration Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.26.2 Configuration Commands

5.26.2.1 ip hosts
This command creates a static entry in the DNS table that maps a host name to an IP address.
There are maximum 8 entries for IPv4 and 8 entries for IPv6.
Syntax
ip host <name> <ipaddr | ipv6addr >
no ip host <name>
<name> - Host name.
<ipaddr|ipv6addr > - IPv4 or IPv6 address of the host.
<no> - Remove the corresponding name to IP address mapping entry.
Default Setting
None
Command Mode
Global Config
5.26.2.2 clear hosts
This command clears the entire static host name-to-address mapping table.
Syntax
clear hosts
Default Setting
None
Command Mode
Privileged Exec
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 622