Quanta Computer QuantaMesh User Manual page 51

UANTA COMPUTER INC.
Link Status: Indicates whether the Link is up or down.
Link Trap: This object determines whether to send a trap when link status changes. The factory
default is enabled.
LACP Mode: Displays whether LACP is enabled or disabled on this port.
Flow Control Mode: Displays flow control mode. The possible values are:
Disable: This port is disabled flow control.
Enable: This port is enabled flow control.
Capabilities Status: Displays interface capabilities.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 51