Configuration Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

6.6.2 Configuration Commands

6.6.2.1 enable rip
This command resets the default administrative mode of RIP in the router (active).
Syntax
enable
no enable
no - This command sets the administrative mode of RIP in the router to inactive.
Default Setting
Enabled
Command Mode
Router RIP Config
6.6.2.2 ip rip
This command enables RIP on a router interface.
Syntax
ip rip
no ip rip
no - This command disables RIP on a router interface.
Default Setting
Disabled
Command Mode
Interface Config
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 736