Quanta Computer QuantaMesh User Manual page 368

UANTA COMPUTER INC.
5.9.3.13 dot1x supplicant timeout held-period
This command configure the held period value.
Syntax
dot1x supplicant timeout held-period <seconds>
no dot1x supplicant timeout held -period
<seconds> - Range: 1-65535.
Default Setting
60
Command Mode
Interface Config
5.9.3.14 dot1x supplicant timeout start-period
This command configure the start period value.
Syntax
dot1x supplicant timeout start-period <seconds>
no dot1x supplicant timeout start-period
<seconds> - Range: 1-65535.
Default Setting
30
Command Mode
Interface Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 368