Quanta Computer QuantaMesh User Manual page 977

UANTA COMPUTER INC.
8.5.2.7 split-horizon
This command sets the RIPngplit horizon mode. None mode will not use RIPngplit horizon mode. Simple
mode will be that a route is not advertised on the interface over which it is learned. Poison mode will be
that routes learned over this interface should be re-advertised on the interface with a metric of infinity
(16).
Syntax
split-horizon {none | simple | poison}
no split-horizon
none - This command sets without using RIPngplit horizon mode.
simple - This command sets to use simple split horizon mode.
poison - This command sets to use poison reverse mode.
no - This command cancel to set the RIPngplit horizon mode and sets none mode.
Default Setting
Simple
Command Mode
IPv6 Router RIP Config
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands 977