Quanta Computer QuantaMesh User Manual page 367

UANTA COMPUTER INC.
5.9.3.11 dot1x supplicant port-control
This command set the authentication mode on the specified port.
Syntax
dot1x supplicant port-control < auto| force-authorized|force-unauthorized>
no dot1x supplicant port-control
Default Setting
auto
Command Mode
Interface Config
5.9.3.12 dot1x supplicant timeout auth-period
This command configure the auth period value.
Syntax
dot1x supplicant timeout auth-period <seconds>
no dot1x supplicant timeout auth-period
<seconds> - Range: 1-65535.
Default Setting
30
Command Mode
Interface Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 367