Quanta Computer QuantaMesh User Manual page 151

UANTA COMPUTER INC.
5.2.8.18 set mld fast-leave
The user can go to the CLI VLAN Configuration Mode to set MLD Snooping fast-leave admin mode on a
particular VLAN, use the set mld fast-leave <vlan-id> vlan configuration command. Use the no set mld
fast-leave <vlan-id> disable MLD Snooping fast-leave admin mode.
Syntax
set mld fast-leave <vlan-id>
no set mld fast-leave <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
Default Setting
Disabled
Command Mode
VLAN database
5.2.8.19 set mld groupmembership-interval
The user can go to the CLI VLAN Configuration Mode to set the MLD Group Membership Interval time
on a particular VLAN, use the set mld groupmembership-interval <vlan-id> <2-3600> vlan
configuration command. Use the no set mld groupmembership-interval <vlan-id> return to default
value 260.
Syntax
set mld groupmembership-interval <vlan-id> <2-3600>
no set mld groupmembership-interval <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
<2-3600> - The range of group membership interval time is 2 to 3600 seconds.
Default Setting
260
Command Mode
VLAN database
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 151