Quanta Computer QuantaMesh User Manual page 590

UANTA COMPUTER INC.
5.21.2.6 no access-list
This command deletes an ACL that is identified by the parameter <accesslistnumber> from the system
or remove an ACL rule that is identified by the parameter <1-28> from the an IP ACL
<accesslistnumber>.
Syntax
no access-list {<1-99> | <100-199>} [<rule-id>]
The ACL number is an integer from 1 to 199. The range 1 to 99 is for the normal ACL List and
i
100 to 199 is for the extended ACL List.
Default Setting
None
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 590