Quick Start Up Uploading From Switch To Out-Of-Band Pc; Quick Start Up Downloading From Out-Of-Band Pc To Switch; Quick Start Up Downloading From Tftp Server - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

2.5.5 Quick Start up Uploading from Switch to Out-of-Band PC

Table 2-5. Quick Start up Uploading from Switch to Out-of-Band PC (XMODEM)
Command
copy startup-config xmodem
<filename>

2.5.6 Quick Start up Downloading from Out-of-Band PC to Switch

Table 2-6 Quick Start up Downloading from Out-of-Band PC to Switch
Command
copy xmodem startup-config
<filename>

2.5.7 Quick Start up Downloading from TFTP Server

Before starting a TFTP server download, the operator must complete the Quick Start up for the
IPAddress.
Table 2-7 Quick Start up Downloading from TFTP Server
Command
copy <url> startup-config <filename> Sets the download datatype to be an image or config file.
Details
This starts the upload and displays the mode of uploading and
the type of upload it is and confirms the upload is taking place.
For example:
If the user is using HyperTerminal, the user must specify where
the file is going to be received by the pc.
Details
Sets the download datatype to be an image or config file.
The URL must be specified as: xmodem: filepath/ filename
For example:
If the user is using HyperTerminal, the user must specify which
file is to be sent to the switch. The Switch will restart
automatically once the code has been downloaded.
Details
The URL must be specified as: tftp://ipAddr/filepath/fileName.
The startup-config option downloads the config file using tftp
and image option downloads the code file.
QuantaMesh | Installation and Quick Startup
Layer 2/3/4 Managed Switch
25