Quanta Computer QuantaMesh User Manual page 975

UANTA COMPUTER INC.
8.5.2.3 ipv6 router rip
Use this command to enter Router RIPng mode.
Syntax
ipv6 router rip
Default Setting
Disabled
Command Mode
Global Config
8.5.2.4 default-information originate
This command is used to set the advertisement of default routes.
Syntax
default-information originate
no default-information originate
no - This command is used to cancel the advertisement of default routes.
Default Setting
Disabled
Command Mode
IPv6 Router RIP Config
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands 975