Quanta Computer QuantaMesh User Manual page 964

UANTA COMPUTER INC.
8.4.2.26 area virtual-link transmit-delay
This command configures the transmit delay for the OSPF virtual interface on the virtual interface
identified by <areaid> and <neighborid>.
Syntax
area <areaid> virtual-link <neighborid> transmit-delay <0-3600>
no area <areaid> virtual-link <neighborid> transmit-delay
<areaid> - Area ID.
<neighborid> - Router ID of the neighbor.
<0-3600> - The range of the transmit delay is 0 to 3600.
no - This command configures the default transmit delay for the OSPF virtual interface on the virtual
interface identified by <areaid> and <neighborid>.
Default Setting
1 second.
Command Mode
Router OSPFv3 Config
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands 964