Quanta Computer QuantaMesh User Manual page 960

UANTA COMPUTER INC.
8.4.2.22 area virtual-link
This command creates the OSPF virtual interface for the specified <areaid> and <neighbor>. The
<neighborid> parameter is the Router ID of the neighbor.
Syntax
area <areaid> virtual-link <neighborid>
no area <areaid> virtual-link <neighborid>
<areaid> - Area ID.
<neighborid> - Router ID of the neighbor.
no - This command deletes the OSPF virtual interface from the given interface, identified by
<areaid> and <neighborid>. The <neighborid> parameter is the Router ID of the neighbor.
Default Setting
The default authentication type is none.
Command Mode
Router OSPFv3 Config
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands 960