Quanta Computer QuantaMesh User Manual page 678

UANTA COMPUTER INC.
6.3.1.2 show ip ospf abr
This command displays the internal OSPF routing table entries to Area Border Routers (ABR). This
command takes no options
Syntax
show ip ospf abr
Default Setting
None
Command Mode
Privileged Eexc
User Exec
Display Messages
Type: The type of the route to the destination. It can be either:
•
intra — Intra-area route
•
inter — Inter-area route
Router ID: Router ID of the destination.
Cost: Cost of using this route.
Area ID: The area ID of the area from which this route is learned.
Next Hop: Next hop toward the destination.
Next Hop Intf: The outgoing router interface to use when forwarding traffic to the next hop.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 678