Quanta Computer QuantaMesh User Manual page 346

UANTA COMPUTER INC.
5.9.1.14 show radius accounting
This command is used to display the configured RADIUS accounting mode, accounting server, and the
statistics for the configured accounting server.
Syntax
show radius accounting [{<ipaddr | ipv6addr | hostname> | name <servername> | statistics {<ipaddr|
ipv6addr | hostname> | name <servername>}}]
<ipaddr | ipv6addr | hostname> - is an IPv4/v6 Address or hostname.
Default Setting
None
Command Mode
Privileged Exec
Display Message
If you do not specify any parameters, then only the accounting mode and the RADIUS accounting
server details are displayed.
RADIUS Accounting Mode: Enabled or disabled
Host Address: The configured IP address of the RADIUS accounting server
Port: The port in use by the RADIUS accounting server
Secret Configured: Yes or No
If the optional token ' ipaddr| ipv6addr| hostname ' or name <servername> is included.
RADIUS Accounting Server IP Address: IP Address of the configured RADIUS accounting server.
RADIUS Accounting Server Name: The name of the configured RADIUS accounting server.
RADIUS Accounting Mode: Enabled or disabled
Port: The port in use by the RADIUS accounting server.
Secret Configured: Yes or No Boolean value indicating whether this server is configured with a
secret.
If the optional token 'statistics <ipaddr| ipv6addr | hostname>' is included, the statistics for the
configured RADIUS accounting server are displayed. The IP address parameter must match that of
a previously configured RADIUS accounting server. The following information regarding the statistics
of the RADIUS accounting server is displayed.
RADIUS Accounting Server Host Address: IP Address of the configured RADIUS accounting
server
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 346