Quanta Computer QuantaMesh User Manual page 172

UANTA COMPUTER INC.
This command set collector max-delay time of Link Aggregation Control Protocol (LACP) on a
port-channel.
Syntax
lacp collector max-delay <delay-value>
no lacp collector max-delay
<delay-value>: 0-65535
no - This command restores collector max-delay time of Link Aggregation Control Protocol (LACP)
on a port-channel
Default Setting
0
Command Mode
Interface Config
5.2.10.11 lacp min-links
This command configures the minimum links for Link Aggregation.
Syntax
lacp min-links <1-32>
no lacp
no - This command resotre the min-links to default value.
Default Setting
1
Command Mode
Interface Port-channel Config
Command Usage
The maximum number of members for each port-channel is 32. For T1048-LB9/T1048-LB9A, the
maximum number of members is 8.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 172