Quick Start Up Factory Defaults - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

2.5.8 Quick Start up Factory Defaults

Table 2-8 Quick Start up Factory Defaults
Command
clear config
copy running-config startup-config
[filename]
reload [warm]
Details
Enter yes when the prompt pops up to clear all the
configurations made to the switch.
Enter yes when the prompt pops up that asks if you want to
save the configurations made to the switch.
Enter yes when the prompt pops up that asks if you want to
reset the system.
You can reset the switch or cold boot the switch; both work
effectively.
warm – indicates only switch application is restarted.
QuantaMesh | Installation and Quick Startup
Layer 2/3/4 Managed Switch
26