Quanta Computer QuantaMesh User Manual page 162

UANTA COMPUTER INC.
This command displays an overview of all port-channels (LAGs) on the switch.
Syntax
show interface port-channel
Default Setting
None
Command Mode
Privileged Exec
Display Message
Channel ID: The ID of this port-channel.
Channel Name: The name of this port-channel (LAG). You may enter any string of up to 15
alphanumeric characters.
Link: Indicates whether the Link is up or down.
Admin Mode: May be enabled or disabled. The factory default is enabled.
Type: This field displays the status designating whether a particular port-channel (LAG) is statically
or dynamically maintained. The possible values of this field are Static, indicating that the
port-channel is statically maintained; and Dynamic, indicating that the port-channel is dynamically
maintained.
Mbr Ports: A listing of the ports that are members of this port-channel (LAG), in slot/port notation.
There can be a maximum of eight ports assigned to a given port-channel (LAG).
Device Timeout: This field displays the device timeout value of actor and partner. The value of
device timeout should be short(1 second) or long(30 seconds).
Port Speed: Speed of the port-channel port.
Port Active: This field lists the ports that are actively participating in the port-channel (LAG).
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 162