Show Process Cpu - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.1.3 show process cpu

This command provides the percentage utilization of the CPU by different tasks.
Syntax
show process cpu
It is not necessarily the traffic to the CPU, but different tasks that keep the CPU busy
i
Default Setting
None
Command Mode
Privileged Exec
Display Message
The following shows example CLI display output for the command.
Memory Utilization Report
status bytes
------ ----------
free 250978304
alloc 275599360
CPU Utilization:
PID Name
-----------------------------------------------------------------------------------------------------
1030 osapiTimer
1032 _interrupt_thread
1034 bcmL2X.0
1035 bcmCNTR.0
1038 bcmLINK.0
1040 bcmL2X.1
1041 bcmCNTR.1
1042 bcmLINK.1
1043 bcmRX
5 Secs 60 Secs 300 Secs
0.00% 0.02% 0.02%
0.00% 0.02% 0.02%
1.99% 2.10% 1.81%
1.59% 1.42% 1.19%
2.99% 2.84% 2.44%
1.99% 2.09% 1.81%
1.39% 1.40% 1.19%
2.99% 2.87% 2.45%
0.19% 0.19% 0.16%
QuantaMesh | Switching Commands
Layer 2/3/4 Managed Switch
36