Quanta Computer QuantaMesh User Manual page 95

UANTA COMPUTER INC.
5.2.3.19 switchport native vlan
This command changes the VLAN ID which will be assigned to untagged or priority tagged frames per
interface.
Syntax
switchport native vlan <vlan-id>
no switchport native vlan <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
no - This command sets the VLAN ID per interface to 1.
Default Setting
1
Command Mode
Interface Config
This command changes the VLAN ID which will be assigned to untagged or priority tagged frames for all
interfaces.
Syntax
switchport native vlan all <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
all - All interfaces.
no - This command sets the VLAN ID for all interfaces to 1.
Default Setting
1
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 95