Quanta Computer QuantaMesh User Manual page 944

UANTA COMPUTER INC.
8.4.1.11 show ipv6 ospf range
This command displays information about the area ranges for the specified <areaid>. The <areaid>
identifies the OSPF area whose ranges are being displayed.
Syntax
show ipv6 ospf range <areaid>
<areaid> - The area id of the requested OSPF area
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area ID: The area id of the requested OSPF area.
IP Address: An IP Address which represents this area range.
Subnet Mask: A valid subnet mask for this area range.
Lsdb Type: The type of link advertisement associated with this area range.
Advertisement: The status of the advertisement. Advertisement has two possible settings: enabled
or disabled.
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands 944