Quanta Computer QuantaMesh User Manual page 200

UANTA COMPUTER INC.
5.3.1.6 ip default-gateway
This command sets the IP Address of the default gateway.
Syntax
ip default-gateway <gateway>
no ip default-gateway
< gateway > - IP address of the default gateway
no - Restore the default IP address of the default gateway
Default Setting
IP address: 0.0.0.0
Command Mode
Global Config
5.3.1.7 ip address dhcp
This command specifies the network configuration protocol to be used. If you modify this value, the
change is effective immediately.
Syntax
ip address dhcp [restart]
<dhcp> - Obtains IP address from DHCP.
<restart> - To restart the DHCP process.
Default Setting
None
Command Mode
Interface-Vlan Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 200