Configuration Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

6.7.2 Configuration Commands

6.7.2.1 ip irdp
This command enables Router Discovery on an interface.
Syntax
ip irdp
no ip irdp
<no> - Disable Router Discovery on an interface.
Default Setting
Disabled
Command Mode
Interface Config
6.7.2.2 ip irdp address
This command configures the address to be used to advertise the router for the interface.
Syntax
ip irdp address <address>
no ip irdp address
<address> - The address used is 224.0.0.1 or 255.255.255.255.
no - The address used is 224.0.0.1.
Default Setting
The default address is 224.0.0.1
Command Mode
Interface Config
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 746