Quanta Computer QuantaMesh User Manual page 541

UANTA COMPUTER INC.
5.20.2.10 match dstip
This command adds to the specified class definition a match condition based on the destination IP
address of a packet.
Syntax
match dstip <ipaddr> <ipmask>
<ipaddr> specifies an IP address.
<ipmask> specifies an IP address bit mask; note that although similar to a standard subnet mask,
this bit mask need not be contiguous.
Default Setting
None
Command Mode
Class-Map Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 541