Show Tech-Support - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.1.8 show tech-support

This command displays system and configuration information when you contact technical support. The
output of the show tech-support command combines the output of the following commands: show
version, show sysinfo, show interface status, show logging, show event log, show logging buffered,
show trap log, show running config, ... etc.
Syntax
show tech-support
Default Setting
None
Command Mode
Privileged Exec
This command is only support on console port.
!
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 42