Quanta Computer QuantaMesh User Manual page 87

UANTA COMPUTER INC.
5.2.3.8 vlan database
This command is used to enter VLAN Interface configuration mode.
Syntax
vlan database
Default Setting
None
Command Mode
Global Config
5.2.3.9 vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification
number (ID 1 is reserved for the default VLAN). VLAN range is 2-4093.
Syntax
vlan <vlan-list>
no vlan <vlan-list>
<vlan-list> - VLAN ID (Range: 2 – 4093) – separate non-consecutive IDs with ',' and no spaces and
no zeros in between the range; Use '-' for range.
no - This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is
reserved for the default VLAN). VLAN range is 2-4093.
Default Setting
None
Command Mode
VLAN database
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 87