Quanta Computer QuantaMesh User Manual page 82

UANTA COMPUTER INC.
5.2.3.3 show vlan association mac
This command displays the VLAN associated with a specific configured MAC address. If no MAC
address is specified, the VLAN associations of all the configured MAC addresses are displayed.
Syntax
show vlan association mac [<macaddr>]
<macaddr> - Enter a MAC Address to display the table entry for the requested MAC address.
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC Address: A unicast MAC address for which the switch has forwarding and/or filtering
information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for
example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes. In an
SVL system, the MAC address will be displayed as 6 bytes. Note: This software version only
supports IVL systems.
VLAN ID: There is a VLAN Identifier (VID) associated with each VLAN. The range of the VLAN ID is
1 to 4093.
Priority: There is a priority for each MAC-based.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 82