Quanta Computer QuantaMesh User Manual page 142

UANTA COMPUTER INC.
5.2.8.4 show ipv6 mld snooping static
The user can go to the Privilege Exec to display MLD snooping static information, use the show ipv6
mld snooping static Privilege command.
Syntax
show ipv6 mld snooping static
Default Setting
None
Command Mode
Privilege Exec
User Exec
Display Message
VLAN: The VLAN ID used with the MAC address to fully identify packets you want L2Mcast Group.
MAC Address: The MAC address of the L2Mcast Group in the format 33:33:xx:xx:xx:xx.
Port: List the ports you want included into L2Mcast Group.
State: The active interface number belongs to this Multicast Group.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 142