Quanta Computer QuantaMesh User Manual page 435

UANTA COMPUTER INC.
5.12.2.3 lldp receive
This command uses to enable the LLDP receive capability.
Syntax
lldp receive
no lldp receive
no - This command is used to return the reception of LLDPDUs to the default value.
Default Setting
Disabled
Command Mode
Interface Config
5.12.2.4 lldp transmit
This command uses to enable the LLDP advertise capability.
Syntax
lldp transmit
no lldp transmit
no - This command is used to return the local data transmission capability to the default.
Default Setting
Disabled
Command Mode
Interface Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 435