Quanta Computer QuantaMesh User Manual page 268

UANTA COMPUTER INC.
5.3.14.6 serviceport ipv6 address
Use this command to configure IPv6 global addressing (i.e. Default routers) information for the service
port.
Syntax
serviceport ipv6 address <address>/<prefix-length> [eui64]
no serviceport ipv6 address [<address>/<prefix-length>]
no - This command remove all IPv6 prefixes on the service port interface.
<address>: IPv6 prefix in IPv6 global address format.
<prefix-length>: IPv6 prefix length value.
[eui64]: Formulate IPv6 address in eui64 address format.
Multiple IPv6 prefixes can be configured for the service port.
i
Default Setting
None
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 268