L2 Priority - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.2.12 L2 Priority

5.2.12.1 show queue cos-map
This command displays the class of service priority map on specific interface.
Syntax
show queue cos-map {<slot/port> | port-channel <portchannel-id>}
<slot/port> - Interface number.
<portchannel-id> - Port-channel interface number. The range of port-channel ID is 1 to 64.
Default Setting
None
Command Mode
Privileged Exec
Display Message
User Priority: Displays the 802.1p priority to be mapped.
Traffic Class: Displays internal traffic class to map the corresponding 802.1p priority.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 185