Show Loginsession - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.1.11 show loginsession

This command displays current telnet and serial port connections to the switch.
Syntax
show loginsession
Default Setting
None
Command Mode
Privileged Exec
Display Message
ID: Login Session ID
User Name: The name the user will use to login using the serial port or Telnet. A new user may be
added to the switch by entering a name in a blank entry. The user name may be up to 8 characters,
and is not case sensitive. Two users are included as the factory default, admin, and guest.
Connection From: IP address of the telnet client machine or EIA-232 for the serial port connection.
Idle Time: Time this session has been idle.
Session Time: Total time this session has been connected.
Session Type: Shows the type of session: telnet, serial port, SSH or HTTP/HTTPS.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 46